Core-3588L AI System on Module Rockchip RK3588

Octa-core 64-bit (4 x Cortex-A76+4 x Cortex-A55)

Up to 2.4GHz

ARM Mali-G610 MP4 quad-core GPU

Support OpenGL ES3.2/OpenCL 2.2/Vulkan1.1, 450 GFLOPS

• 6 TOPS
• Support INT4/INT8/INT16 mixed operation
• Support framework switching of TensorFlow/MXNet/PyTorch/Caffe

Hardware decoding:

• 8K@60fps H.265/VP9/AVS2
• 8K@30fps H.264 AVC/MVC
• 4K@60fps AV1
• 1080P@60fps MPEG-2/-1/VC-1/VP8

Hardware encoding:

• 8K@30fps H.265 / H.264

LPDDR4/LPDDR4x (4GB/8GB/16GB optional, up to 32GB)

eMMC (32GB/64GB/128GB/256GB optional)

• 3 x PCIe2.1(1 lane), shared with SATA 3, only supporting RC (Root Comple), with a maximum data rate of 5 Gbps
• 1 x PCIe3.0 (2×2, 1×4, 4×1) 4 options: 1 x 4 lanes / 2 x 2 lanes / 4 x 1 lane / (1 x 2 lanes + 2 x 1 lane); each lane supports 8 Gbps data rate;
• Supporting RC and EP

3 x SATA 3.0 shared with PCIe 2.1

4V (voltage tolerance ± 5%)

• 2 x HDMI2.1 TX/eDP1.3 TX (one 8K@60Hz HDMI supporting HDCP2.3; eDP1.3, 4K@60Hz, supporting HDCP1.3; HDMI and eDP unable to work simultaneously)
• 2 x DP1.4a (shared with USB3.1 Gen1, supporting 1, 2, 4 lanes; up to 7680 x 4320@30Hz; HDCP2.3, HDCP 1.3)
• 2 x MIPI DSI (supporting MIPI DPHY 2.0 or CPHY 1.1, 4K@60Hz; dual MIPI displays (left-right), and RGB/YUV formats (up to 10 bits))
• 1 x BT.1120 output (supporting RGB format (up to 8 bit), with a data rate of up to 150MHz and resolution up to 1920 x 1080@60Hz)

Support 7 displays (achieve up to 7 displays (2 x HDMI + 2 x MIPI DSI + 2 x DP (one DP can be converted to VGA) + 1 x BT.1120))

• 2 x I2S (8 lanes), supporting TX and RX, audio resolution ranging from 16 to 32 bit, and a sampling rate of up to 192 KHz)
• 2 x I2S( 2 lanes), supporting TX and RX, audio resolution ranging from 16 to 32 bit, and a sampling rate of 192 KHz)
• 2 x SPDIF, supporting 2×16 bit audio data storage and dual-phase stereo output
• 2 x PDM (8 lanes), up to 8 channels, audio resolution of 16 to 24 bit, a sampling rate of up to 192 KHz; PDM master receive mode and multiple MIC arrays

Android and Linux OS

45 mm x 50 mm

≈20 g

• Operating temperature: 20℃～60℃
• Operating humidity: 10%～90%RH (non-condensing)

GMAC/SDIO 3.0/USB 3.0 can expand Gigabit Ethernet, WiFi 6/Bluetooth, and 5G/4G LTE

• 2 x USB 3.1 OTG (shared with DP (USB3OTG_0 and USB3OTG_1))
• 1 x USB 3.1 HOST (shared with PIPE-PHY2 (USB3OTG_2) )
• 2 x USB2.0 HOST
• 2 x USB2.0 OTG

All GPIOs can be used to generate interrupts.

8 x ADC, 12-bit single-ended input SAR-ADC, with a sampling rate of up to 1MS/s

16 x PWM, supporting up to 16 on-chip PWM channels, with capture mode

3 x CAN 2.0B, supporting CAN standard frames and extended frames for transmission and reception

10 x UART, built-in 2-channel 64-bit FIFO, used respectively for TX and RX; supporting 5-bit, 6-bit, 7-bit, and 8-bit serial data transmission, with a baud rate of up to 4 Mbps; all 10 UART channels support automatic flow control mode

5 x SPI: each controller supports 2 chip select outputs; offering both serial master and serial slave modes, with software configuration

9 x I2C, supporting 7-bit and 10-bit addressing modes, achieving data transfer rates of up to 100k bits/s in standard mode and up to 400k bits/s in fast mode

1 x SDIO 3.0, supporting SDIO 3.0 (4-bit data bus widths)